If you can't find what you need or require a custom part simply call and speak to one of our knowledgeable fluid connection specialists. They can walk
you through the ordering process quickly and professionally.
The pre-installation bodies mount in a vise and allow nuts and rings to be affixed to the tubing without using the fitting body which may still be on the vehicle or equipment.
The sawing vise bolts to a table top. A length of tubing (from 6mm to 42mm O.D.) is inserted in the vise and clamped. Use a fine tooth hacksaw in the guide to cut the tubing length. A straight cut is produced which is essential for a proper seal.