Metric Tube Benders

The tube bender comes with 6 dies with outside diameters from 6 to 18mm. The bender base clamps in a vise and the proper die is mounted on the pivot along with the bending lever (handle). The tube is inserted into the bender and is very easily bent around the die to the desired angle.

Similar to the above but with three dies for tubes from 20mm to 25mm.

Ref. Catalog Page 193

Home || Technical Support || Contact Us


	Metric Tube Benders (Part number MTB618) The tube bender comes with 6 dies with outside diameters from 6 to 18mm. The bender base clamps in a vise and the proper die is mounted on the pivot along with the bending lever (handle). The tube is inserted into the bender and is very easily bent around the die to the desired angle. (Part Number MTB2025) Similar to the above but with three dies for tubes from 20mm to 25mm. Ref. Catalog Page 193 Home \|\| Technical Support \|\| Contact Us