Tools & Convenience Items
Thread Identification Kit (Part number MSIK1)
Contains one each of SVC120 (Caliper), MTPG24 (Metric Thread Pitch Gage), BSPTG28 (British Thread Gage) and USTPG30 (U.S. Thread Gage) along with an instruction booklet explaining thread types and how to use the tools to measure fittings. All items are fitted into a durable vinyl case.
NOTE: One of the greatest challenges is communicating with our customers on identifying either the thread or type of components that they might need. The above kit will help eliminate ordering items that are incorrect.
The hand deburring tool permits quick, easy clean-up of the I.D. and O.D. of tubing which is important in obtaining a good seal in fittings. Good for copper, brass, aluminum or annealed steel tubing, for sizes 4mm O.D. through 38mm O.D. The tool has four special cutting edges for either internal or external deburring. Replacement blades are available.
The tube bender comes with 6 dies with outside diameters from 6 to 18mm. The bender base clamps in a vise and the proper die is mounted on the pivot along with the bending lever (handle). The tube is inserted into the bender and is very easily bent around the die to the desired angle.
Similar to the above but with three dies for tubes from 20mm to 25mm.
Home || News and Announcements || Technical Support || Distribution ||
|| Company Profile || Contact Us
 |
|
|
|
|
|
|
|
INSIDE
OUTSIDE
7788 Metric Drive •
Mentor, Ohio 44060
TEL. 800-874-3077 • FAX 800-874-3066