Weld Sockets: Piping connections of the weld socket type are advisable when the service conditions of any system and or environmental conditions are adverse. For example: - Heavy intermittent vibration stresses - Strong water hammering - Extreme temperatures, wide temperature variations - Systems where installation time is expensive Welding sockets are easily compatible with couplings of the cutting ring type, remove the ring and fit the welding socket instead. Directions for assembly: 1. Cut the pipe square and remove burrs inside and out. 2. Slide the nut onto the welding socket. 3. Weld socket and pipe together, clean the weld seam. 4. Oil both body and nut. 5. Install the O-Ring in the groove provided in the socket. 6. Insert the socket into the coupling body and tighten the nut by hand. NOTE: BE CAREFULL NOT TO DAMAGE THE SEAL. 7. Apply the final tightening pressure with a wrench.
GO TO WELD SOCKETS WITHOUT CENTERING PIN   GO TO WELD SOCKETS WITH CENTERING PIN
Contact Malone Today!	7788 Metric Drive • Mentor, Ohio 44060 TEL. 800-874-3077 • FAX 800-874-3066 Send E-mail To Customer Service